Kismet Drone on WRT54G (v3) and OpenWRT
I will probably be updating this over time.
Great reference....
http://www.renderlab.net/projects/wrt54g/openwrt.html
- If you get the error "bind(): network is down", perform these steps
1. nvram set lan_ifnames="eth1 eth2 eth3 vlan0"
2. nvram commit
3. reboot; exit
- In the kismet_drone.conf file, the device should be: "source=wrt54g,eth1:prism0,wrt54g"
0 Comments:
Post a Comment
<< Home